TopBanana

AMD P2 N95 Nano-Tech 4-Layer Particulate Respirator Face Mask Headbands (50/Pack)

Sold out

AMD P2 N95 Nano-Tech 4-Layer Particulate Respirator Face Mask Headbands (50/Pack)

Product Description	Introducing the first Australian made P2/FFP2 respirator. As true blue as a kangaroo eating Vegemite on toast. Only difference is, this has 4 protective layers to protect you and your loved ones from airborne viruses and atmospheric contaminants. AMD P2 Respirators are made using nanofiber technology. This advanced filtering is what allows you to be comfortable and safe for longer compared to other masks like blue surgical masks, cloth masks, even non nanofiber N95 or P2 masks. AMD masks are face contouring, low leakage with excellent breathability and high water resistance. While most masks will offer some level of protection, the AMD P2 Respirator T4H boasts 99.66% Particle Filtration Efficiency (PFE) and 99.92% Bacterial Filtration Effiency (BFE). You can learn more about lab test results here. What’s different about this vs the T4 AMD P2 Respirator mask? With the headband and nose foam, it creates an even tighter seal for users that need to pass fit tests. Technology: Nano-filters, comprised of nanofibers, deliver higher filtration efficiency than standard melt blown filters. They’re lighter and more breathable. They also maintain their functionality after exposure to moisture while typical filters lose their electrostatic properties once exposed to water. AMD’s nano-filters are water resistant and protective against airborne particles, aerosols, and liquid. Fit: Innovative three panel design fits naturally around the nose and mouth creating a better seal and aesthetic. Elastic ear loops hold the respirator securely in place. A soft inner layer and mouldable padded nose bridge wire provide extra comfort. Comfort: Nano-filter respirators are lighter than standard respirators and allow enhanced breathability which allow them to be worn for hours. The three panel design unfolds to shape naturally around the face maximising ventilation around the nose and mouth while still maintaining an effective seal to the environment. Nano-filter respirators are potentially viable options for populations with breathing restrictions such as the elderly and those with heart and lung conditions. Packaging: Each nano-filter respirator is individually packaged for hygiene and designed to fold flat to facilitate portability and storage. Individual wrapping makes it convenient to carry and distribute without contamination. Every box contains 50 individual masks.
Product Features	More breathable than almost any other P2 or N95 mask. Lasts up to 6 times longer than any other disposable mask (Most others need to be replaced after 3-4 hours use Reduced impact on the environment / land fill (as you will use less of them) Can be worn comfortably for up to 24 hours continuously First P2 certified respirator masks manufactured in Australia Trusted by medical professionals world-wide Nano-filter filters out 99.66% of airborne particles like virus’ as tested by VICLAB (BSI) 17.7.20 (compared to approximately 60% for many imported masks) Bacterial Filtration Efficiency (BFE) ≥99.92% AS 4381 Level 3 Authorised by FDA through EUA for medical use Australia & NZ standard AS/NZS 1716:2012 4 protective layers to protect you from airborne virus’ Cutting-edge nanotechnology, to make them light and breathable
Directions	1. Before putting on the AMD P2 Respirator T4H mask, wash hands for at least 20 seconds with soap and water or rub hands together thoroughly with alcohol-based hand sanitiser. 2. Take care not to touch the inside layer of the P2 respirator that will be in contact with the nose and mouth when unpacking and while donning. 3. Check for defects in the face respirator such as tears or broken loops. 4. Position the label side of the P2 respirator outward and orient the respirator so that the nose foam in the nose bridge strip is at the top. 5. Unfold the respirator P2 mask while holding onto the edges (again being careful not to touch the area that will be in contact with the nose and mouth). Position the unfolded respirator over the nose and mouth and place one earloop over each ear. 6. Mould the nose bridge wire to the bridge of the nose and while pinching the nose bridge in place stretch the bottom of the respirator to over the chin. Press along the edges of the P2 respirator with both index fingers to maximise the seal. Avoid touching the respirator while using it; if touched, clean hands with alcohol-based hand sanitiser or soap and water. Replace P2 respirator if it becomes obviously contaminated; never reuse single-use respirators.
Removing The Respirator	Wash hands with soap and water or alcohol-based hand sanitiser before removing the respirator. Remove the P2 respirator by unhooking the ear loops, taking care not to touch the front of the respirator which might have become contaminated. Discard immediately in a closed bin and clean hands with alcohol-based hand sanitiser or soap and water.
Comparison of Common Respirator Masks
Australian Standard for Respirator Masks
Product Equivalents and Their Relevant Standards

Share

Share

Link

Close share Copy link